Maintenance Mechanic - 1st & 2nd shift
Positions available for first (04:
30am until 1:
30pm) and second shift (4:
30pm until 02:
30 am +1)Job Description
Summary:
Maintenance Mechanic responsible to safely maintain, repair, replace and modify refrigeration equipment, water treatment and distribution system, hydraulic and air compressors with optimal quality and efficiency.
Position Functions:
Installs, repairs, replaces, and performs preventative maintenance inspections on, but not limited to, refrigeration equipment, chilled water systems, hydraulics, wastewater systems and air compressors.
knowledge of tools and equipment applicable to trade.
Responds to emergency calls, evaluates situation, and takes corrective action.
Work overtime when emergencies arise to prevent disruption of the facility.
Maintains a high standard of safety, cleanliness, and efficiency.
Operate CMMS system and demonstrates competency.
Effectively communicate with production and other mechanics to identify problematic areas of concern; provide and receive feedback and/or support through collection and analysis of information.
Must demonstrate an understanding of the company's objectives including productivity, yields, food safety, quality, customer service and cost goals.
Supports achieving those goals.
Performs daily inspections, emergency repairs, and routine adjustments; follows periodic preventive maintenance schedule.
Participates on safety teams.
Performs other duties as required or assigned.
Positions Skills & Qualifications Desired:
Physical Requirements:
the employee is required to stand for extended periods of time (duration of the shift, 8 hours or more); walk; reach with hands and arms; climb or balance; stoop; kneel; crouch; bend continuously; or crawl.
The incumbent must be able to climb stairs and ladders or step up onto a platform several times throughout the shift; and is occasionally required to sit.
The employee must be able to push/pull/lift and/or move 50 pounds.
The incumbent must operate powered industrial equipment, hand and power tools skillfully and safely.
Work Environment:
the employee is routinely exposed to wet/cold conditions of 34 36 degrees and also at times hot conditions; high, precarious places (ex:
25 feet above ground level for extended hours); and outside weather conditions (rooftop).
The noise level in the work environment is usually moderate to occasionally loud, which requires hearing protection.
Previous experience with Ammonia Refrigeration Systems will be considered a plus.
Ability to read, write, and speak English.
Must work effectively in a team setting.
Effective communication skillsFamiliarity with preventive/predictive based maintenanceHands on experience with cooling processes, refrigeration, vacuum pumps, compressors, condensers, purging, and water treatment.
Must have mechanical experience with a good mechanical aptitude.
Knowledge of electrical power maintenance (480V) and process controls troubleshooting (PLC level to the device level).
Pneumatic and hydraulic systems experienceExperience with HVAC system operation and maintenanceAbility to use Microsoft computer programs:
Outlook, Word, Excel.
Estimated Salary: $20 to $28 per hour based on qualifications.
30am until 1:
30pm) and second shift (4:
30pm until 02:
30 am +1)Job Description
Summary:
Maintenance Mechanic responsible to safely maintain, repair, replace and modify refrigeration equipment, water treatment and distribution system, hydraulic and air compressors with optimal quality and efficiency.
Position Functions:
Installs, repairs, replaces, and performs preventative maintenance inspections on, but not limited to, refrigeration equipment, chilled water systems, hydraulics, wastewater systems and air compressors.
knowledge of tools and equipment applicable to trade.
Responds to emergency calls, evaluates situation, and takes corrective action.
Work overtime when emergencies arise to prevent disruption of the facility.
Maintains a high standard of safety, cleanliness, and efficiency.
Operate CMMS system and demonstrates competency.
Effectively communicate with production and other mechanics to identify problematic areas of concern; provide and receive feedback and/or support through collection and analysis of information.
Must demonstrate an understanding of the company's objectives including productivity, yields, food safety, quality, customer service and cost goals.
Supports achieving those goals.
Performs daily inspections, emergency repairs, and routine adjustments; follows periodic preventive maintenance schedule.
Participates on safety teams.
Performs other duties as required or assigned.
Positions Skills & Qualifications Desired:
Physical Requirements:
the employee is required to stand for extended periods of time (duration of the shift, 8 hours or more); walk; reach with hands and arms; climb or balance; stoop; kneel; crouch; bend continuously; or crawl.
The incumbent must be able to climb stairs and ladders or step up onto a platform several times throughout the shift; and is occasionally required to sit.
The employee must be able to push/pull/lift and/or move 50 pounds.
The incumbent must operate powered industrial equipment, hand and power tools skillfully and safely.
Work Environment:
the employee is routinely exposed to wet/cold conditions of 34 36 degrees and also at times hot conditions; high, precarious places (ex:
25 feet above ground level for extended hours); and outside weather conditions (rooftop).
The noise level in the work environment is usually moderate to occasionally loud, which requires hearing protection.
Previous experience with Ammonia Refrigeration Systems will be considered a plus.
Ability to read, write, and speak English.
Must work effectively in a team setting.
Effective communication skillsFamiliarity with preventive/predictive based maintenanceHands on experience with cooling processes, refrigeration, vacuum pumps, compressors, condensers, purging, and water treatment.
Must have mechanical experience with a good mechanical aptitude.
Knowledge of electrical power maintenance (480V) and process controls troubleshooting (PLC level to the device level).
Pneumatic and hydraulic systems experienceExperience with HVAC system operation and maintenanceAbility to use Microsoft computer programs:
Outlook, Word, Excel.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
